4 Ways to Install Ceiling LED Panel Lights

Most people don't know how to install the LED panel light and don't know what to do, so this article is to walk you through the installation process quickly.LED panels could be installed for ceiling lighting in the following four ways:


Built-in or Recessed
Built in and recessed installation offers a modern and sleeker look, albeit the latter provides more subdued lighting.
1. Remove the traditional grid lights;
2. Choose the replacement that fits exactly in the grid;
3. Recess the LED panel light into the grid. (And, in case of falling down, we recommend that you use screws to fix the four hanging cables onto the roof, as suspending shows above).


Ceiling or Wall Mounted
Mounted LED lights typically highlight the style of the fixture. And it can be ceiling mounted or wall mounted.
1. Fasten the clip on the place where the panel light is installed, such as the ceiling;
2. Screw the other clip to the panel;
3. Screw the two clips using M4x8 screws.

Suspended
Suspended installation is required for chandeliers and pendant lights.
1. Install the accessories to the panel lights (please contact our salesman for Specification, in which detailed installation steps are shown.)
2. Use screws to fix the four hanging cables onto the roof. Make sure that the 4 steel cables are adjusted so that the LED panel is horizontally aligned.


Spring Clips
1. Put the spring onto the clip;
2. Screw the other side of clip onto panel light through ring.
3. And recess the panel into the hole in the ceiling.


Tips:
1. Please go through the user manual before installing the panel light (to understand the components of the device).
2. Please install it to an area that close to power socket (to reduce the length of wire).
3. Remember the dimension so that you can drill holes where-ever required to mount the led panel.